1/48 - 1/56 (28mm Wargame) Sandbag Walls Set #2 "Curved"

Description: 1/48 - 1/56 (28mm Wargame) Sandbag Walls Set #2 "Curved"For Dioramas and Wargame TablesCast in Brown or Gray ResinTamiya 1/48, Bolt Action 28mm and Space Marine Figures Not Included! Helpful Tips - Working With Resin Parts: Cleaning/Degreasing: All resin bits should be cleaned with washing up liquid, glass cleaner or alcohol before painting to remove any mold release or oils for best adhesion of glue and paint.Sanding: Use a dust mask and safety glasses when sanding. Resin, plastic, wood or other fine ground dust can be harmful. Gluing: Resin parts need to be glued with "CA Glues or Super Glue" (Cyan Acrylate) or epoxy glues or epoxy putties. Normal model cement will not work on resin.Painting: All pieces should be cleaned and primed before painting for strongest finish. Most paints will stick to resin but can be easily scratched or scraped off without primer. I like to paint and dry brush with combinations of Tamiya, Testors and Vallejo Paints - Washed with Games Workshop Citadel Black and Brown Washes.Bending Resin: Resin bits can be bent and shaped using boiling water. Toss a piece is a coffee cup, pour in some boiling water and let sit for 30-60 seconds and bend away to fit your fender, turret or other spots etc... Practice on some older unused resin pieces from your spares box. This is also a good tip for flattening out resin buildings or any other resin pieces that may not be flat. Experiment with time and tempature of water. Removing Old Paint: Do not soak resin bits in brake fluid to remove paint. Brake fluid may work on Poly Styrene (kit plastic) but it wills destroy most resins.

Price: 20 USD

Location: Flagstaff, Arizona

End Time: 2023-11-15T02:14:05.000Z

Shipping Cost: 5 USD