2" Yellow Reflective Tape Type 2 Super Engineer Grade Nikkalite Safety SEG Safe

Description: 2" Yellow Type 2 Reflective Tape SUPER-ENGINEER GRADE REFLECTIVE TAPE (SEG) is 60% to 100% brighter than regular engineering grade reflective tape. Great for smooth flat or smooth round surfaces like a pipes, bollards, and bar gates. SEG is a Type II retro-reflective adhesive tape that is approximately 5.5 mil and has a permanent acrylic adhesive with a peel-off backing. It utilizes embedded microscopic glass beadlets to reflect light and is commonly used for reflective striping or markings on vehicles, bicycles, wheel chairs, bollards, & stock gates. It meets ASTM specifications D 4956 and LS-300C is resistant to weathering and fading and has a 12-year minimum longevity. On vehicles, it is best applied using a soapy water solution (or Windex) and a squeegee. For best results, the adhesive should be allowed to cure for about 48 hours. This is a Nikkalite product and is stamped with a stat watermark to show that it is super engineer grade and not regular engineer grade (which is not nearly as bright). Sold in 10, 20, or 30 foot lengths. ASTM D4956 Type 2 Reflective Tape.Single layer design meaning it will not delaminate like other reflective tapes.Rated for a 12 year outdoor life.Visible for thousands of feet away versus hundreds with standard reflective tapes.Very aggressive adhesive. Peel, stick and press on with a soft cloth. (Clean dry smooth surface)Used to mark emergency vehicles, fire trucks, ambulances, helmets, loading dock areas, bollards, poles, dumpsters, gates, barricades, tractor trailers, and more.

Price: 16.99 USD

Location: Pensacola, Florida

End Time: 2024-10-17T02:37:33.000Z

Shipping Cost: 5.99 USD