Description: DCi 4|300DAFour-channel, 300W @ 4Ω Power Amplifier with Dante™ / AES67 Networked Audio, and 70V/100V / EN 54-16 Compliant for Life Safety ApplicationsFor applications that require Dante or AES67 networked audio, the Crown DriveCore Install DA Series provides a balanced combination of output power, channel count and speaker load flexibility along with proprietary DriveCore® technology for superb efficiency and exemplary audio quality. The DCi DA Series includes a high-powered DSP with JBL speaker tunings, network control/monitoring, and the ability to drive 2/4/8/16 ohm, 70V and 100V speaker loads. The amp’s advanced capabilities and support for Dante Domain Manager makes it perfect for installations that have standardized on Dante for networked audio transport. All Crown Audio products sold by High Fidelity AI are Brand New in Original Factory Sealed packaging with Full Warranty! List price for this item is $3,650! Redundant, independent Dante / AES67 portsPrimary & SecondaryWill accept 48khz or 96khzCapable of sending out Dante / AES67 audio from analog inputs pre/post processing (@ 48kHz)Audio Architect Control and MonitoringDriveCore Amplifier TechnologyUniversal PFC Power SupplyDSP48kHz processing20 PresetsInput routerHigh, medium, and low priority inputsInput delay up to 2sInput EQCrossoverOutput EQOutput Delay up to 100msLevelMAX limiterLoad MonitoringPilot toneNormalBurstContinuous Load MonitoringSweep Load MonitoringChannel Auto-StandbySpeaker TuningsAux-PortSleep contact closureAmp Status outputRemovable air filtersFront panel LED indicatorsAES67 CompatibleIntegrated Dante™ / AES67 Networked Audio – Simplifies installation by enabling Dante / AES67 networked audio signals to be sent directly to the amplifier. Provides flexibility of installation options available with our expansive line-up of DriveCore Install amplifiers. Includes support for Dante 4.0 firmware for integration with Dante Domain Manager.Network Configuration, Monitoring & Control – Better monitoring, control and audio manipulation with the HiQnet™ protocol over standard TCP/IP network. The HiQnet Audio Architect software allows for remote configuration, monitoring, and control of all aspects of the DCi-DA Series amplifiers.Programmable General Purpose Input/Output Port – GPIO ports can be configured in many different ways, such as volume controls, recall presets, or to report errors to third-party control system.Digital Signal Processing – DSP capabilities include the following:LevelMAX LimitersInput/Output EQCrossoverDelayMatrix RouterSpeaker Line MonitoringSpecificationsOutput Channels4Frequency Response (8Ω, 20Hz - 20kHz)±0.25dBTotal Harmonic Distortion (at full rated power, 20Hz - 20kHz)0.35%Damping Factor (20Hz to 100Hz)>1000Load Impedance (Stereo/Dual Mode)2Ω - 16Ω; 70Vrms and 100VrmsLoad Impedance Bridge Mono4Ω - 16Ω; 140Vrms and 200VrmsCoolingContinuously variable speed forced air, front to back airflowMaximum Fan Noise (re dBA SPL @ 1M)47Required AC Mains (±10%)100V-240V ~ 50/60HzPower Connector20A IECDimensions (W x H x D)483 mm x 89 mm x 362 mm 19 in x 3.5 in x 14.25 inWeight10.66 kg (23.5 lbs)
Price: 2500 USD
Location: Townsend, Delaware
End Time: 2024-08-13T18:08:30.000Z
Shipping Cost: N/A USD
Product Images
Item Specifics
All returns accepted: ReturnsNotAccepted
Brand: Crown
Type: Power Amplifier
Number of Channels: 4
Number of Inputs: 4
Model: Crown Audio DCI4X300DA-U-USFX
Features: Balanced, Bridgeable, Built-in DSP, Rack Mountable
Number of Outputs: 4
