DSO Shell Oscilloscope Full Assembled with Bnc-Clip Cable Probe, 1Msa/S, 0-200Kh

Description: DSO Shell Oscilloscope Full Assembled with Bnc-Clip Cable Probe, 1Msa/S, 0-200Khz, 5Mv/Div Sensitivity and 2.4-Inch Color TFT Display DC Power adapter is included. With Automatic mode, conventional mode and single trigger mode. Convenient to capture the instantaneous waveform. With secondary development on the basis, can be changed to voltmeter, data loggers. 2.4-inch color TFT displayWaveform parameter digital display include: Frequency, period, pulse width, duty ratio, MAX./MIN./AVG./Peak-Peak/virtual values and effective value; Adopts ARM Cortex-M3 processor (STM32F103C8)Rising or falling edge trigger are available, also the trigger level position and vertical displacement are adjustable. Short-circuit and open-circuit detection to find out the soldering errorObservable the previous waveform before trigger (negative delay). Freeze waveform display at any time (HOLD function). Come with instructions, easy to install and operateWaveform storage function: Waveform will not lose when save/tune out the waveform/shutdown waveform. Test signal source with 1KHz /3.3V square wave. Pls if have any quality issue and need support, will reply within 24hours, or replace with a new one Attention: 1) Kindly note 9V power supply included. 2) Pls use power supply adapter to give enough voltage to the device, or it cannot power on it or screen flickering, the adapter need "+" inside, " -" outside ( Center is Positive pole, Outside is negative pole ) 3）Carton package Pls if need support from us. We will reply within 24hours, replace a new product or give you fully if you wish. thank you! This is fully assembled DSO Shell oscilloscope, upgraded product of DSO138. With new design and it offers more accurate and reliable measurements. 5mV/div sensitivity and low background noise make the device particularly useful for measuring weak signals. Come with a very detailed instructions and a probe to get you started easily. Require 9V DC power supply with 5.5mm (2.1mm center) jack and included here. Features and specifications: Maximum real-time sampling rate: 1 MSa/s Analog bandwidth: 0 - 200 KHz Sensitivity range: 5 – 20 mV/div Maximum input voltage: 50 Vpk (1X probe) Input impedance: 1M ohms/20pF Accuracy: 12 bits Record length: 1024 points Coupling modes: DC / AC / GND Time Base Range: 500s/Div – 10us / Div Trigger modes: Auto, normal, and single Trigger position: Center of buffer Supply voltage: DC 9 V (8 – 10 V) Current consumption: ~120 mA @ 9 V Main board size: 94 x 65 mm (3.7 x 2.56 in) Analog board size: 65 x 47 mm (2.56 x 1.85 in) Screen size: 52 x 40 mm (2 x 1.57 in) Package size: 14.5 x 10 x 3.7 cm (5.7 x 3.94 x 1.45 in) Package weight: 179 grams (6.33 oz) Package include: 1 x Fully Assembled Digital Oscilloscope 1 x User Manual (English) 1 x BNC Clip Probe Package Dimensions 4.8 x 3.8 x 0.9 inches; 4.8 Ounces Shipping Fast shipping is very important for us. Our standard US shipping service is FREE. Your order will be shipped within 2-3 business days upon full payment received. Your order will be delivered within 2-3 business days after the handling time. We only ship to the confirmed PayPal address. We reserve the right to cancel any order for any reason at any time. We are not responsible for undeliverable addresses. Returns and payment We offer a 30 days return policy from checkout winning date. We allow only PayPal as payment methodFeedBack Your feedback very important to us, after you get your package and you are satisfied with our service please leave us positive feedback If you have any problem with your order / any questions please before leave any type of feedback For any questions, using eBay contact system Please visit our eBay store to check out other items for sale!Thank you for shopping at our store.

Price: 49.99 USD

Location: Rowlett, Texas

End Time: 2024-02-16T03:29:49.000Z

Shipping Cost: 0 USD