GKTECH V2 Z33 350Z/G35 Skyline Front Upper Camber Arms

Description: GKTECH V2 Z33 350Z/G35 Skyline Front Upper Camber Arms - (FUCA'S) suspension The GKTECH V2 350z/ G35 Front Upper Camber Arms (FUCA's) are used to adjust front camber and caster. When you lower your car negative camber is introduced. This then reduces the contact patch of your tires and thus available traction. Our front upper camber arms will get this issue sorted!When designing these arms we were able to incorporate more clearance in the balljoint area from the inner wheel well by 0.39' (10mm) to assist when the upper arms are extended.These arms are a direct replacement of the standard arms and allow for -0.98' (-25mm) through to 0.59' (+15mm) of adjustment compared to the OEM arm. With the OEM FLCA we have seen these arms adjust camber as low as -5.5 degrees all the way through as high as +1.0 degree! With our adjustable lower control arms we have seen as low as -11 degrees of camber showing a great range of usable adjustment. As a completely unique design we have now made it possible to adjust caster, by using stackable shims it allows you to further increase adjustment by + or – 1 degree of caster.These arms have been CAD designed, FEA tested, they are laser cut from high strength steel, are TIG welded and to finish the arms off they're E-coated (electrophoresis coating) for rust prevention. The arms feature high misalignment PTFE lined rose/ heim joints, that we use in all our suspension arms, that are a common size bearing that can be found at your local bearing supplier, or if you need we do have them on the shelf and the provided dust boots will ensure that the heims last the test of time.- New feature for V2 design - Now adjustable on car (will save you a load in fitting/adjusting costs!)- Lightweight design- High misalignment PTFE lined common size bearings- CNC Laser cut from high strength steel with CNC machined ends.- CAD designed, FEA tested and TIG welded- Balljoint/ Inner wheel well clearance GKTECH V2 Z33 350Z/G35 Skyline Front Upper Camber Arms - (FUCA'S) suspension The GKTECH V2 350z/ G35 Front Upper Camber Arms (FUCA's) are uséd to adjust front camber and caster. When you lower your car negative camber is introduced. This then reduces the contact patch of your tires and thus available traction. Our front upper camber arms will get this issue sorted! When designing these arms we were able to incorporate more clearance in the balljoint area from the inner wheel well by 0.39' (10mm) to assist when the upper arms are extended. These arms are a direct replacement of the standard arms and allow for -0.98' (-25mm) through to 0.59' (+15mm) of adjustment compared to the OEM arm. With the OEM FLCA we have seen these arms adjust camber as low as -5.5 degrees all the way through as high as +1.0 degree! With our adjustable lower control arms we have seen as low as -11 degrees of camber showing a great range of usable adjustment. As a completely unique design we have now made it possible to adjust caster, by using stackable shims it allows you to further increase adjustment by + or – 1 degree of caster. These arms have been CAD designed, FEA tested, they are laser cut from high strength steel, are TIG welded and to finish the arms off they're E-coated (electrophoresis coating) for rust prevention. The arms feature high misalignment PTFE lined rose/ heim joints, that we use in all our suspension arms, that are a common size bearing that can be found at your local bearing supplier, or if you need we do have them on the shelf and the provided dust boots will ensure that the heims last the test of time. - New feature for V2 design - Now adjustable on car (will save you a load in fitting/adjusting costs!) - Lightweight design - High misalignment PTFE lined common size bearings - CNC Laser cut from high strength steel with CNC machined ends. - CAD designed, FEA tested and TIG welded - Balljoint/ Inner wheel well clearance × × × × × FAQs Will these fit my car? We can only confirm fitment for the vehicles listed above under "confirmed fitment". How do they adjust caster? We've made caster adjustable through stackable shims. By using larger shims in front of the bearing you are moving the arm backward (towards the rear) increasing caster, by using larger shims behind the bearing you are moving the arm forward and reducing caster. How much camber will they give me? On a stock lower arm we have seen camber as low as -5.5 degrees of camber and as high as +1.0 degrees! With our adjustable lower control arms we have seen as low as -11 degrees of camber for those who want complete adjustment. I have the V1 arms, can the V2 achieve more negative camber? Yes! Due to the V2's on car adjustment they allow you to introduce more negative camber. The differences being: V1 adjustment -25mm to +15mm V2 adjustment -42mm to +15mm How long is the warranty on these arms? All GKTECH suspension arms come with a lifetime warranty against manufacturing defects. The Teflon lined rose joints come with a 1 year replacement warranty. We stock spare bearings so even after the 12 months is up we can still help with replacements, worse case scenario they're a 5/8" rose joint for the outer bearings and a COM10T inner bearing which are readily available through your local autoshop. Are these suspension arms legal for use on street cars? We recommend that you contact your local RTA for clarification/confirmation. Where can I find these common size bearings? They can be found at any local bearing supplier as mentioned, however, we do keep them on the shelf so that the arms can be serviced. The rose/ heim joints used, use part number PCM12T The outer bearing is a COM10T Are there any special tools required? No, a spanner set will do the job which we do sell separately here - Double open ended wrenches Do you carry spare parts for this product? Yes we carry the following spare parts for this product;Replacement Pcml12Tes Heim - Spare part can be found here Compatibility Specifics NOTE: Ifiniti G35 Skyline Coupe (2003-2007 only) Ifiniti G35 Skyline Sedan (2003-2006 only) BUY NOW Shipping calculatorinfocosts Click here to get a shipping quote Click the Shipping & Payments tab above the listing description for more info FREE Local PickupShipping Price: (local shipping) See more... - - - - - - - - - Click the Shipping & Payments tab above the listing description for more info! Additional delivery notes PICK UP OPTION Our items are available for pick-up. Pick up procedure is as follows: Purchase the item through eBay Email us to coordinate pickup PICK UP OPTION Sorry, our items are NOT available for pick-up. PAYMENT Immediate payment is required upon selecting "Buy It Now" or upon checking out through the cart. We accept payment via U.S. PayPal accounts and all Major Credit Cards, Debit Cards & Google Pay. We are legally required to collect sales tax in those states and localities where we maintain a physical presence (nexus). The applicable amount of sales tax charged to an order will be calculated based on the shipment destination's state and local sales tax laws. Thank you for shopping with us on eBay! Immediate payment is required upon selecting "Buy It Now" or upon checking out through the cart. We accept payment via All Major Credit Cards (Visa, Mastercard, AMEX, Discover), Google Pay, PayPal, & Apple Pay (on mobile & eBay App). Thank you for shopping with us on eBay! eBay should update your Freight cost into the checkout process once you have committed to purchase. If checkout gets stuck and does not allow you to proceed, simply use your browser's Back button to return to the Pay Now option and try again. Paying via money order Simply add the freight cost to the item cost and forward the total amount to the address to be provided following your purchase. Paying via Direct Deposit Simply add the freight cost to the item cost and forward the total amount to the address to be provided following your purchase. Additional Information No additional information at this time Ask us a question --> You might also like GKTECH S chassis to Z33 Banjo to Banjo braided clutch line OEM replacement GKTECH S/R Chassis OEM Rear Knuckle Spherical Bushes - 30.5mm (PAIR) GKTECH S14A 200SX (Kouki) Radiator Cooling Side Panels (Pair) GKTECH Z33 350z/G35 Skyline Solid gearbox mount - Stiffen up your drivetrain Contact To contact our Customer Service Team, simply click the button here and our Customer Service team will be happy to assist. Ask us a question © GKTech USA Shipping & Payments Click the Shipping & Payments tab above the listing description for more info Payment Accepted Payment Methods Immediate payment is required upon selecting "Buy It Now" or upon checking out through the cart. We accept payment via U.S. PayPal accounts and all Major Credit Cards, Debit Cards & Google Pay. We are legally required to collect sales tax in those states and localities where we maintain a physical presence (nexus). The applicable amount of sales tax charged to an order will be calculated based on the shipment destination's state and local sales tax laws. Thank you for shopping with us on eBay! Returns Returns are accepted Items must be returned within 30 days of the auction ending Buyer will pay for return shipping. eBay integration by

Price: 569 USD

Location: Albuquerque, New Mexico

End Time: 2024-02-11T02:02:11.000Z

Shipping Cost: 0 USD