Description: Mobula8 2S 85mm Digital HD Micro FPV Bwhoop The New Mobula8 Digital HD Micro FPV whoop comes with a new flight controller which is specific for Digital HD CINEWHOOP. Built in UART ExpressLRS receiver and 12A 4-IN-1 BLheli_S ESC. The same Brushless motor and Gemfan 2023 propeller like the Mobula8 Analog version. Comes With for DJI O3, Walksnail avatar and HDZERO VTX option. Smooth flight and High definition video transmission would bring us exited FPV experience. Model optionMobula8 O3Mobula8 WalksnailMobula8 HDZEROMobula8 O3 Lite Flight controllerCRAZYF405HD ELRSCRAZYF405HD ELRSCRAZYF405HD ELRSCRAZYF405HD ELRSESCOnboard 12A 4-IN-1Onboard 12A 4-IN-1Onboard 12A 4-IN-1Onboard 12A 4-IN-1ReceiverOnboard UART ELRS receiver ELRS V3.0Onboard UART ELRS receiver ELRS V3.0Onboard UART ELRS receiver ELRS V3.0Onboard UART ELRS receiver ELRS V3.0VTX and CameraFor DJI O3 Air unitAvatar HD Mini liteHDZERO whoop lite bundleNO VTX and CameraFrameMobula8 FrameMobula8 FrameMobula8 FrameMobula8 FrameCanopyMount bracket for DJI O3Molding canopyMolding canopyMount bracket for DJI O3Dimension120mmx120mmx45mm120mmx120mmx48mm120mmx120mmx47mm120mmx120mmx45mmWeight80g48g46.5g42.5g Features: Digital HD FPV experience New CrazyF405 ELRS HD flight controller Powerful and Smooth UART ExpressLRS receiver Built-in blackbox for Gyroflow and PID Tune Package includes: Item Name Qty Mobula8 Frame1 CrazyF4HD ELRS flight controller firmware target:BETAFLIGHTF41 EX1103 KV11000 brushless motor4 Gemfan Hurricane 2023 tri-blade propellers(4cw+4ccw)1 Option1: For DJI O3 Air unit 1 Option2: Walksnail avatar HD Mini 1S lite kit Option3: HDZERO Whoop Lite bundle Option4: No VTX and camera version Canopy 1 Screw driver1 Spare parts specifications:Motor Mode: EX1103 KV11000 Configu-ration:9N12P Stator Diamter:11mm Stator Length:3mm Shaft Diameter:Φ1.5mm Motor Dimension(Dia.*Len):Φ13.5mm*15.5mm Weight(g):3.8g No.of Cells(Lipo):1-2SPropellers Weight:0.88g Material: PC Pitch:2.3inch Props Dia:52.17mm Center Thickness:5mm Center Hole Dia:1.5mmFlight controller MCU: STM32F405RGT6 (168MHZ, 1Mbyte FLASH) GYRO Sensor: BMI270 (SPI connection) Mount hole size: 25.5mm*25.5mm Power supply: 1-2S battery input (DC 2.9V-8.7V) Built-in 12A(each) Blheli_S 4in1 ESC Built-in Serial ExpressLRS 2.4G Built-in BMP280 Barometer Built-in 8MBp blackbox Built-in voltage meter sensor , voltage meter scale 110 Built-in current meter sensor , current meter scale 470Onboard 4in1 ESC Power supply: 1-2S LiPo/LiPo HV Current: 12A continuous peak 15A (3 seconds) Support BLHeli_S Bluejay firmware Factory firmware: Bluejay ESC V0.19 Firmware target: Z-H-30 Default protocol: DSHOT300 When use 1s battery and high KV 0702/0802 motors, should set startup power to 1100/1200Onboard UART ExpressLRS 2.4GHz Receiver Packet Rate option: 25Hz/50Hz/150Hz/250Hz/500Hz RF Frequency: 2.4GHz Antenna: enameled copper wire 31mm length Telemetry output Power: <12dBm Default firmware version: ExpressLRS V3.0.1 Firmware target: HappyModel EP 2400 RX Could update firmware via ExpressLRS configuratorFor DJI O3 Air Unit Works withFor DJI FPV Goggles V2, For DJI Goggles 2, and For DJI FPV Remote Controller 2 D-Cinelike mode for Vivid Colors Flagship O3+ Video Streaming Customizable Canvas Mode 155° Super-Wide FOV 1/1.7-Inch Sensor Compact in SizeWalksnail version Camera Model Avatar lite camera Image Sensor 1/2.7”1nch Resolution 1080P/60fps,720P/120fps,720P/60fps Ratio 16/9 4/3 Lens 2.1mm FOV 170° Aperture F2.0 Shutter Rolling Rolling shutter Min.Illumination 0.001Lux Weight 1.8g Dimensions 14*14*16mm VTX Model Avatar mini 1s module Communication Frequency 5.725-5.850GHz Transmitter Power (EIRP) FCC:<25.5dBm;CE:<14dBm;SRRC:<20dBm; MIC:<25dBm I/O Interface JST1.0*6(Power in)JST0.8*4(USB) Mounting Holes 25.5*25.5mm Dimensions 30*30*6.5mm Storage 8G Recording 1080p/720p Weight 5.1g Operating Temperature -20-40℃ Channels 8 Wide Power Input 3.1V-5V Supported FC System Betaflight OSD Canvas mode Bitrate 25mbps 50mbps Latency Average delay 22ms Antenna IPEXHDZERO Version HDZero Nano Lite Camera 14x16x11 mm 1.5gram 0.5 inch, up to 10650 mV/Lux-sec ultra-high sensitive CMos sensor Excellent low light performance Fov: 4:3: D:130° H:108° v:84° 16:9:D:122° H:108° V:65° HDZero Whoop Lite VTX 1-3S Input 25mW/200mW RF Output-SmartAudio Support 25.5x25.5 M2 Soft Mounting- Antenna Retention Removable Shielding Box- 32.5x32.5mm(29x29mm inner) 4.5grams/4mm Thickness (without shielding)
Price: 109.4 USD
Location: 深圳
End Time: 2024-08-08T09:16:34.000Z
Shipping Cost: 45 USD
Product Images
Item Specifics
Restocking Fee: No
Return shipping will be paid by: Seller
All returns accepted: Returns Accepted
Item must be returned within: 30 Days
Refund will be given as: Money back or replacement (buyer's choice)
Brand: Happymodel
Country/Region of Manufacture: China
MPN: Does Not Apply
Type: Aircraft rack
Available Variations
Color: For DJI O3 version
Price: 430.9 USD
Available Quantity: 200
Quantity Sold: 0
Color: For O3 lite version
Price: 109.4 USD
Available Quantity: 200
Quantity Sold: 0
Color: ForWalksnailversion
Price: 275.11 USD
Available Quantity: 200
Quantity Sold: 0
Color: For HDZERO version
Price: 275.11 USD
Available Quantity: 201
Quantity Sold: 1