Güde

PC Products 72561 Pc-Concrete Two-Part Epoxy Adhesive Paste for Anchoring and Cr

Description: PC Products 72561 Pc-Concrete Two-Part Epoxy Adhesive Paste for Anchoring and Cr Two-part epoxy adhesive paste to fill and repair cracks in concrete, and to anchor threaded rods, bolts, and dowels into concrete, grout-filled block, and unreinforced masonry High-tack paste resists moisture for application in damp environments and can be used in vertical applications Can be used in indoor and outdoor applications with an application temperature range from 35 to 115 degrees F and a service temperature range from -20 to +115 degrees F Provides work time of 20 minutes and cure time of 4 hours (at 75 degrees F) Meets ASTM C881-99 Formulated for anchoring threaded rods, bolts, rebar dowels and smooth dowels into concrete, grout filled block and unreinforced masonry. PC-Concrete is excellent for filling and repairing cracks in concrete, and out-performs all caulks and hydraulic cements. PC-Concrete will not come loose from any cleaned concrete surface and will hold during expansion and contraction of concrete. PC-Concrete is the best solution for permanent concrete repair. Product Description PC Concrete epoxy gel is an anchoring and concrete repair product. PC Concrete has exceptional strength, maximum field reliability, along with a high heat deflection temperature of 134 degree F, which provides engineers and contractors with a choice for specifying and setting adhesive anchors in elevated temperature environments. PC Concrete out performs all caulks and hydraulic cement. PC Concrete will not come loose from any cleaned concrete surface. PC Concrete the best solution for permanent concrete repair. PC Concrete is a two component 1:1 ratio, 100 percent solids, high modulus, and structural epoxy gel. It is a solvent free, no odor, high strength, moisture-insensitive epoxy. In addition, PC Concrete has a long working time 20 minutes at 75 degree F, while providing a bolt down/paint time in as little as 4 hours. PC-Concrete has been tested in accordance with the ICC-AC58 Acceptance criteria for adhesive anchors in concrete and masonry elements. PC-Concrete is recognized for the following uses: static loads, seismic / wind loading, long term creep at elevated temperatures, static loading at elevated temperatures, damp holes, freeze thaw conditions, critical and minimum edge and spacing distances. Used as adhesive for wood, metal all types, glass, brick, block, rubber, concrete, stone, slate, fiberglass, tile, and more in any and all combinations. Color component a: White. Color component B: Dark gray. Color mixed: Concrete gray. Work time 70 degree F: 20 minutes. Cure for service: 4 Hours. Elongation: 1.9 percent. Conduction electric: Non conductive. Thermal shock: Excellent. Toxicity: Non toxic once cured. Heat range: -20 to 115 degree F. Compressive strength: 10990 psi yield. Compressive modulus: 214,180 psi. Tensile strength: 6790 psi. Heat deflection: 134 degree F 7 day. Bond strength: 1100 psi 2 day, 1640 psi 7 day. Consistency: Non-sag paste. Water Absorption: 0.40 percent. Shrinkage: 0.003. PC-Products, celebrating 75 years of “Fixing Your Things”, with quality, reliable repair products. Repair solutions for just about anything that needs repair or what you can manage to break. From Concrete to Wood restoration and heavy duty permanent repairs, we have you covered.Yeah; We can fix that From the Manufacturer PC-Products, celebrating 75 years of “Fixing Your Things”, with quality, reliable repair products. Repair solutions for just about anything that needs repair or what you can manage to break. From Concrete to Wood restoration and heavy duty permanent repairs, we have you covered.Yeah; We can fix that Shipping We offer FREE shipping on all orders! We ship within Three business days of payment, usually sooner. We use a selection of shipping services such as UPS, FedEx, USPS etc. We only ship to the lower 48 states, no APO/FPO addresses or PO Boxes allowed. Local pickups and combined shipping options are not provided at this time. Return You can return a product for up to 30 days from the date you purchased it. Any product you return must be in the same condition you received it and in the original packaging. Please keep the receipt. Payment We accept payment by any of the following methods:PayPalPlease pay as soon as possible after winning an auction, as that will allow us to post your item to you sooner! Feedback Customer satisfaction is very important to us. If you have any problem with your order, please contact us and we will do our best to make you satisfied. Contact Us If you have any queries, please contact us via ebay. We usually respond within 24 hours on weekdays. Please visit our eBay store to check out other items for sale! Thank you for shopping at our store.

Price: 44.49 USD

Location: Phoenix, AZ

End Time: 2024-11-16T17:46:27.000Z

Shipping Cost: 0 USD

Product Images

PC Products 72561 Pc-Concrete Two-Part Epoxy Adhesive Paste for Anchoring and CrPC Products 72561 Pc-Concrete Two-Part Epoxy Adhesive Paste for Anchoring and CrPC Products 72561 Pc-Concrete Two-Part Epoxy Adhesive Paste for Anchoring and CrPC Products 72561 Pc-Concrete Two-Part Epoxy Adhesive Paste for Anchoring and CrPC Products 72561 Pc-Concrete Two-Part Epoxy Adhesive Paste for Anchoring and CrPC Products 72561 Pc-Concrete Two-Part Epoxy Adhesive Paste for Anchoring and CrPC Products 72561 Pc-Concrete Two-Part Epoxy Adhesive Paste for Anchoring and CrPC Products 72561 Pc-Concrete Two-Part Epoxy Adhesive Paste for Anchoring and Cr

Item Specifics

Return shipping will be paid by: Buyer

All returns accepted: Returns Accepted

Item must be returned within: 30 Days

Refund will be given as: Money Back

Color: Gray

Size: 8.6 oz

Country / region of manufacture: United States

EAN: 0054983072561

ISBN: 0054983072561

Package Dimensions LxWxH: 10.39x3.07x1.89 Inches

Weight: 1.05 Pounds

MPN: 72561

Brand: PC Products

Type: Anchoring Epoxy System

Model: 72561

Recommended

PC-Products PC-11 Epoxy Adhesive Paste, Two-Part Marine Grade, 1/2lb in Two C...
PC-Products PC-11 Epoxy Adhesive Paste, Two-Part Marine Grade, 1/2lb in Two C...

$19.31

View Details
PC-Products Wood Repair Epoxy Paste and Wood Hardener Kit, PC-Woody 6 oz and PC-
PC-Products Wood Repair Epoxy Paste and Wood Hardener Kit, PC-Woody 6 oz and PC-

$25.11

View Details
PC PRODUCTS 075005 EpoxyAdhesive,DualCartridge,1:1MixRatio 25F530 PC PRODUCTS 07
PC PRODUCTS 075005 EpoxyAdhesive,DualCartridge,1:1MixRatio 25F530 PC PRODUCTS 07

$14.09

View Details
Pc Products 167779 Instant Adhesive, Pc-7 Series, Clear, 1 Oz, Bottle, 1:01 Mix
Pc Products 167779 Instant Adhesive, Pc-7 Series, Clear, 1 Oz, Bottle, 1:01 Mix

$20.59

View Details
PC PRODUCTS 128336 Epoxy Adhesive,Can,1:1 Mix Ratio 4JMN3
PC PRODUCTS 128336 Epoxy Adhesive,Can,1:1 Mix Ratio 4JMN3

$140.89

View Details
PC-Products PC-11 Epoxy Adhesive Paste, Two-Part Marine Grade, 1/2lb in Two Off
PC-Products PC-11 Epoxy Adhesive Paste, Two-Part Marine Grade, 1/2lb in Two Off

$19.09

View Details
PC-Products 080115 PC-11 Paste Epoxy White 1/2 lb. Tub
PC-Products 080115 PC-11 Paste Epoxy White 1/2 lb. Tub

$15.49

View Details
Pc Products 072561 Crack Filler, 8 Oz, Cartridge, Pc-Concrete, Gray
Pc Products 072561 Crack Filler, 8 Oz, Cartridge, Pc-Concrete, Gray

$22.75

View Details
PC Products 72561 PC-Concrete Two-Part Epoxy Adhesive Paste for Anchoring and oz
PC Products 72561 PC-Concrete Two-Part Epoxy Adhesive Paste for Anchoring and oz

$38.13

View Details
PC Products PC-Masonry Epoxy Adhesive Paste, Two-Part Repair, 128 oz in Two P...
PC Products PC-Masonry Epoxy Adhesive Paste, Two-Part Repair, 128 oz in Two P...

$201.76

View Details