Description: N53 Effluent Pump with 15′ Cord - Part # 53-0002 Our Model N53 nonautomatic Effluent Pump is designed to remove unwanted water in sump or septic effluent applications. The professional-grade, 3/10 HP Model 53 is known for its dependability. The N53 is a nonautomatic pump requiring a piggyback float switch or control panel for operation. Either option allows you to set the on and off point of the pump in the field. This is ideal in an application with a deep sump pit or pump tank.The Model 53’s switch case, motor housing, and pump housing are each constructed of cast iron. The corrosion resistant engineered plastic vortex impeller has a smooth surface allowing water and solids to pass freely through the pump. The pump’s identification tag, handle, and hardware are made of non-corrodible stainless steel. This attention to detail ensures that the Model 53 is able to withstand the most demanding applications.Every pump is submerged in water and tested to its published performance curve, ensuring it meets your expectations and delivers peace of mind right out of the box. Oil filled for optimal heat dissipation: This design minimizes concerns about the pump overheating or breaking down due to extreme heat generation during extended-use applicationsNonautomatic pump (Piggyback variable level float switch available separately)Built with a vortex impeller to allow free passage of solids to prevent cloggingPowder-coated epoxy finish provides corrosion-resistance and extends life in harsh environmentsStainless steel screws, handle and hardware to prevent rust and corrosion100% factory tested: Our factory-tested pumps ensure reliable performance in challenging applications with fewer concerns about mechanical failures3-year limited warranty: This model comes with warranty coverage from Zoeller Pump Company, giving you extra protection and more peace of mind Submersible pump for dewatering (sump) or effluent (septic tank systems)Features:Submersible (NEMA 6) 2 pole mechanical switch & variable level long cycle systems availableCorrosion resistant powder coated epoxy finishNo sheet metal parts to rust or corrodeStainless steel screws, switch arm, guard and handleNo screens to clogWatertight neoprene square ring between motor and pump housingOil-filled, hermetically sealed, non-automatic.Upper and lower sleeve bearings running in bath of oilEntire unit pressure tested after assemblyCarbon and ceramic shaft sealMaximum temperature for effluent or dewatering 130°F (54°C)Passes 1/2" spherical solids1-1/2" NPT dischargeOn point: 7-1/4", Off point: 3"Watertight and dust tightPermanently oiled bearingsImpeller Type: Non-clogging vortex impellerReserve Powered Design. For unusual conditions a reserve safety factor is engineered into the design of every Zoeller pump.Model 53 Specific Features:Cast iron switch case, motor and pump housingEngineered thermoplastic baseEngineered, glass filled, plastic impeller with metal insertStainless steel guard and handleLower and upper bearings, oil fed cast ironSpecs–Type:ManualApplication:PlumbingMaterial:Cast IronHorse Power:3/10Voltage:115VFlow at 5 FT Head:43 GPMAmperage:9.7Shutoff Head (ft.):19.25'Phase:1Hertz:60RPM:1550Cord Length:15'Cord Type:UL Listed, 3-Wire Cord & PlugHeight (Inches):10.0625"Width (Inches):10-3/32"
Price: 220.99 USD
Location: Huntsville, Alabama
End Time: 2024-09-28T14:50:38.000Z
Shipping Cost: 0 USD
Product Images
Item Specifics
All returns accepted: ReturnsNotAccepted
Brand: Zoeller
Type: Submersible Pump
Horse Power: 3/10 HP
Item Height: 8 in
Voltage: 115 V
Model: 53-0002
MPN: 53-0002
Features: Submersible
Item Length: 10.5 in
Country/Region of Manufacture: United States
Item Width: 10 in
Item Weight: 21 lbs
